PRESONUS AudioBox Stereo Quick Start Manual page 250

When audio effects are inserted on the same channel, all of the plug-ins will appear in tabs at
the top of the plug-in header GUI. This makes switching between effects in the same Insert
Device Rack and signal path quick and easy.
The user interfaces for effects from third-party manufacturers will vary drastically; for more
information, please refer to the documentation for each effect. Studio One's built-in effects are
discussed in depth in the "Built-In Effects" chapter.
9.2.4 Reorder Inserts
Inserts affect the audio signal path in the top-to-bottom sequential order in which they are
inserted. An insert can be reordered by clicking-and-dragging it above, below, or in between
other inserts. It is helpful to experiment with different signal paths to achieve the best possible
sound or a particular effect.
9.2.5 Navigating Inserts
By default, only one window displays the user interface for an open insert effect. This keeps
screen clutter and window juggling to a minimum. To quickly switch between insert effects on
a single channel, open one of the insert effects and do one of the following:
Click on any other effect tab at the top of the plug-in header GUI to switch to an effect on the
same channel.
Click on the down arrow at the top left of the Insert Effect window and choose from the list of
inserts to select the interface for a specific insert on the channel.
Select Show in Console at the bottom of this list to quickly view the related channel in the
Console.
Float the mouse cursor over the down arrow at the top left of the Insert Effect window, or the
insert effect tabs area, then mouse-wheel up or down to step sequentially through the
interface for each insert on the channel.
Alternatively, press [F11] on the keyboard to open the effect editor for the selected Audio
Track, then press [Ctrl]+[Page Up]/[Page Down] to cycle through the effects in that channel's
Device Rack.
By clicking on the Pin button in the upper right of the Insert Effect window, the interface for
any insert can be made to stay open in an independent window until you choose to close it.
With an insert effect pinned, opening another insert effect will open a new Insert Effect
window. Any number of Insert Effect windows can be pinned and open simultaneously.
9.2.6 Copy an Insert to Another Channel
It is often helpful to be able to copy an insert effect, including its current settings, to another
channel. To do this, click on the desired insert effect in the Insert Device Rack and drag it
directly onto any other channel or into the Insert Device Rack on any other channel. Dragging
132