PRESONUS AudioBox Stereo Quick Start Manual page 251

an insert effect to the left or right edge of the viewable Console will scroll the Console left or
right to expose any channels beyond those currently viewable.
It is also possible to click on the Copy button in the plug-in header GUI, then switch to another
instance of the same plug-in and click on Paste to copy settings from one instance to another.
9.2.7 Compare
The Compare button in the plug-in header GUI allows you to compare the current settings for
a plug-in to the settings stored the last time the Song or Project was saved.
This makes it possible to freely compare potential changes for a plug-in to existing settings,
while retaining a quick way back to existing settings.
9.2.8 Bypassing and Deactivating Inserts
It is possible to bypass, as well as deactivate, insert devices. When deactivating an insert effect,
the insert is turned completely off, which can free up CPU resources. When an insert is
bypassed, the audio signal is simply rerouted around the insert. Bypassing is automatable;
insert activation is not.
To bypass an insert effect, click on the Bypass button found either in the top left of the effect's
GUI header or within the effect GUI, depending on the effect.
To deactivate, or turn off, an insert effect, click on the Activate button for the insert effect in
the Insert Device Rack. There is also an Activate button at the top left of every Insert Effect
window. Deactivating an insert effect will stop all processing related to it, which frees the
computer processing resources previously dedicated to that insert effect.
To deactivate or activate all insert effects in any Insert Device Rack, click on the Activate All
button at the top of the Insert Device Rack.
9.2.9 Remove an Insert
To remove an insert effect from the Insert Device Rack, do one of the following:
Click on the menu arrow for the insert effect in the Insert Device Rack and select
•
Remove from the pop-up menu.
Click on the insert effect in the Insert Device Rack and drag it into the Trash Bin panel
•
of the Console.
All inserts can be simultaneously removed from an Insert Device Rack by clicking on the menu
arrow at the top of the Rack and selecting Remove All. When any insert effect is removed, it is
placed in the Trash Bin, where it can be restored to its original state and location at any time.
133