Record In Studio One Artist - PRESONUS AudioBox Stereo Quick Start Manual

4.5

Record in Studio One Artist

1. Enable phantom power on the AudioBox USB.
2. Turn up the Channel 1 level on the AudioBox
USB while the ensemble is playing the loudest
it will be performing. You should see the input
meter in Studio One Artist react to the input.
Adjust the gain so the input level is near its
maximum without clipping (distorting).
Power User Tip: When recording very loud source
material, it may be difficult to set the input gain so
that it is not clipping. PS626 microphones feature
a pad that will lower the output level of each
microphone by 10 dB. Engage this pad by sliding
the switch on each PS626 to the -10dB position.
AudioBox™ Stereo User Guide
23