Advertisement
8
In the "Installation completed successfully" window, click Restart.
9
After your computer restarts, run Watcher: in Finder™, choose Go > Applications, and
then double-click Watcher. Watcher should start.
10
If the New Port Detected window appears, click Continue.
11
If a window appears, prompting you to enter your password, enter your Mac password,
and then click OK.
12
Watcher displays a status message or an "Alert" window. Use the following table to
determine your next actions.
Text/window
Description/next action
displayed
Name of your
Your device is preactivated. You are ready to connect to the network; see
carrier
"Connecting to the network" on page 11.
"Device is
Your device is preactivated. Unlock the device:
Locked"
1. From the Extras item on the Watcher menu, choose Unlock ... Device.
2. In the Watcher window, enter the lock code (PIN), and click OK.
If you can't recall your lock code, try using the last four digits of your
device's phone number ("About Watcher") or try 0000. If none of these
work, contact your service provider.
Once your device is unlocked, you are ready to connect to the network;
see "Connecting to the network" on page 11.
8
2131300 - AirCard 402 QSG, no GPS - Mac, and Windows Watcher Contemporary Theme.indd 5
Text/window
Description/next action
displayed
"Alert" window
Your device is not activated.
("This device is
1. In the Alert window, click Yes.
not activated...")
If an Alert window ("Watcher is attempting to activate the modem...")
is displayed, see the row below.
2. If the Activation Assistant is displayed, continue from step 2 in the
Activation Assistant section (see the next page).
"Alert" window
Your device is not activated.
("Watcher is
1. Wait until the process is completed.
attempting to
If activation is successful, Watcher displays "Disconnected" or the
activate the
name of the carrier, after which you are ready to connect to the
modem...")
network; see "Connecting to the network" on page 11.
2. If Watcher displays "Not activated", use the Activation Assistant (see
the next page).
"Not activated"
Your device is not activated. Use the Activation Assistant (see the next
page).
9
01/09/2009 11:42:42
Advertisement
