Control Panel - Elation TVL4000 User Instructions

TVL4000
5-Pin XLR DMX Connectors.
connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures
may be implemented in a 3-pin XLR DMX line. When inserting stan-
dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be
used, these adaptors are readily available at most electric stores. The
chart below details a proper cable conversion.
3-Pin XLR to 5-Pin XLR Conversion
Conductor 3-Pin XLR Female (Out)
Ground/Shield
Data Compliment (- signal)
Data True (+ signal)
Not Used
Not Used
©Elation Professionals® - www.elationlighting.com - TVL4000 User Manual Page 7
Some manufactures use 5-pin XLR
5-Pin XLR Male (In)
Pin 1 Pin 1
Pin 2 Pin 2
Pin 3 Pin 3
Pin 4 - Do Not Use
Pin 5 - Do Not Use
Set Up TVL4000
1 Display: To show the various menus and the selected functions
2 Indicator LED:
DMX
MASTER
SLAVE
COLOR TEMP.
3 Button:
MENU
DOWN
UP
ENTER
4 Color Temperature:
5 Dimmer Adjust knob: Adjust bightness for the unit.
6 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
7 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal
8 Mains input: Connect to supply mains power
©Elation Professionals® - www.elationlighting.com - TVL4000 User Manual Page 8
On DMX input present
On Master Mode
On Slave Mode
Flashing Max. power consumption of CW/WW
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
Adjust the color temperature from 3200k to 6500k, 25K as a step.
When the value is between 4825K and 4875K the green LED
indicator will light .It means the power consumption of CW/WW
color the has reached maximum.

Control Panel