Manual Dimming And Zoom Control - Elation KL FRENSEL 8 User Manual

Table of Contents

M A N U A L D I M M I N G A N D Z O O M C O N T R O L

u FEATURE IS DISABLED WHEN DMX INPUT CABLE IS CONNECTED TO FIXTURE!

TO USE DIMMING AND ZOOM KNOBS, DISCONNECT DMX CABLE IF CONNECTED.

Follow steps below to enable manual DIMMING and ZOOM control knobs.

1. Access fixture system menu navigating to Test menu then access ManCtrl sub menu.

Reset.M

Calibrat

Test

ManCtrl

u NOTE:

To access the LCD Menu Control Display when locked/OFF, press and hold the

MODE button for 3 seconds.

2. Select Stobe menu, set to value of 255 (LED ON), then exit fixture system menu.

3. Push DIMMING knob to unlock, rotate to desired level, push knob again to lock.

Repeat this process each time a dimmer adjustment is desired.

4. Push ZOOM knob to unlock, rotate to desired level, push knob in again to lock.

Repeat this process each time a dimmer adjustment is desired.

LCD DISPLAY

DMX CABLE CONNECTED

Zoom

PassWord

Password=050

Zoom

000-255

Dimmer, Zoom, Strobe

Reset Zoom Motor

Calibrate Zoom Motor

(PSWD Required to Access)

Manual Control Functions

NO DMX CABLE CONNECTED

www.elationlighting.com

Table of Contents