Control Panel - Elation KL FRESNEL 6 User Manual

C O N T R O L P A N E L
The fixture includes an easy to navigate system menu. The control panel (see image below) is
located on the side of the fixture and provides access to the main system menu, where all nec-
essary system adjustments canbe made.
During normal operation, pressing MODE button once will access the fixture's main menu.
Once in the main menu, you can navigate through the different functions and access the sub-
menus with the UP and DOWN buttons. Once you reach a field that requires adjusting, press
the ENTER button to activate that field, then use the UP and DOWN buttons to adjust the
field. Pressing the ENTER button once more will confirm your setting. You may exit the main
menu at any time without making any adjustments by pressing the MODE button.
NOTE: The display screen will automatically shut off after approximately 1 minute of inactiv-
ity. To re-activate the display screen, press and hold the MODE button for 3 seconds.
STANDALONE
Press the MODE button to access the fixture's main menu. Use the UP and DOWN buttons to
navigate to DMX Settings and press the ENTER button. Navigate to No DMX Status and press
the ENTER button. Navigate to Standalone and press the ENTER button.
15