Elation TVL4000 User Instructions

TVL4000
User Instructions
7/12
TVL4000
Unpacking:
Thank you for purchasing either the TVL4000 by Ela-
tion Professionals . Every TVL4000 has been thoroughly tested and
®
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your fixture for
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
contacting customer support first.
Introduction:
The TVL4000 is a DMX intelligent LED fixture. The
TVL4000 has 3 DMX channel modes; Mode 1 is 2 DMX Channels,
Mode 2 is 2 DMX Channels, and Mode 3 is 3 DMX Channels. This fix-
ture has two operating modes; manual mode or DMX controlled. The
TVL4000 can be run as stand alone unit or in a master-slave configu-
ration.
Customer Support:
Elation Professionals
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.elationlighting.com for any com-
ments or suggestions. Service Hours are Monday through Friday 8:00
a.m. to 4:30 p.m. Pacific Standard Time.
Voice: (323) 582-3322
Fax: (323) 832-9142
E-mail: support@elationlighting.com
To purchase parts online visit http://parts.elationlighting.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
©Elation Professionals® - www.elationlighting.com - TVL4000 User Manual Page 2
General Information
provides a toll free cus-
®