Elation CMY Zoom 575 User Manual
  1. Manuals
  2. Brands
  3. Elation Manuals
  4. Lighting Equipment
  5. CMY Zoom 575
  6. User manual
Elation CMY Zoom 575 User Manual

Elation CMY Zoom 575 User Manual

Elation stage lighting user manual cmy zoom 575
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CMY Zoom 575
User Manual
Elation Professional
4295 Charter Street
Los Angeles, Ca 90058
www.elationlighting.com
Rev. 04/07/2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CMY Zoom 575 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Elation CMY Zoom 575

Summary of Contents for Elation CMY Zoom 575

  • Page 1 CMY Zoom 575 User Manual Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com Rev. 04/07/2006...
  • Page 2 CMY Zoom 575™ ©Elation Professional® CMY Zoom 575™...

  • Page 3: Table Of Contents

    10. DMX Channel Traits…………………………………………………………………….. a. DMX Channel Values…………………………………………………………… 40 11. Error Codes………………………………………………………………………………. 43 12. Cleaning and Maintenance……………………………………………………………… 45 13. Warranty…………………………………………………………………………………... 46 14. Photometric Data………………………………………………………………………… 48 15. Dimensional Drawings………………………………………………….……………….. 49 16. Circuit Schematic………...………………………………………………………………. 50 17. Technical Specifications…………………………………………...………….………… 51 ©Elation Professional® CMY Zoom 575™...

  • Page 4: General Information

    INTRODUCTION: Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The CMY Zoom 575,™ has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit.
  • Page 5 Please do not discard the shipping carton in the trash. Please recycle whenever possible. WARRANTY REGISTRATION: The CMY Zoom 575™ carries a two year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number.

  • Page 6: Discharge Lamp Warning

    CMY Zoom 575™ Thus, lamp should always be replaced at the end of their recommended duty cycle. Extreme caution should be used when operated this or any fixture fitted with a gas discharge lamp. Never open this fixture while in use! During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture.

  • Page 7: Safety Instructions

    2. Never touch the fixture during normal operation. This can cause severe personal injuries and/or damage to the fixture. 3. Be sure to unplug the CMY ZOOM 575™ from the power outlet before performing any service related issues. 4. Lamp Replacement; Allow at least 30 minutes after disconnecting main power before you open the CMY ZOOM 575™.
  • Page 8 ©Elation Professional® Never touch the device during operation! The housing may heat up Never look directly into the light source, as sensitive persons may suffer an epileptic shock. CMY Zoom 575™ CMY Zoom 575™...

  • Page 9: Features

    • 8 User Assignable Program Presets - Internal Program: Edit and save programs to the incorporated EEPROM through the front control panel or external controller; you can save a maximum of 48 scenes, and run the saved programs by using the “run” menu on the front control panel ©Elation Professional® CMY Zoom 575™...

  • Page 10: General Guidelines

    CMY Zoom 575™ 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to This fixture was designed for indoor use only, use of this fixture outside will void manufactures warranty.

  • Page 11: Lamp Installation

    2. Gently pull out the lamp/socket assembly to access the lamp. 3. Gently remove the old lamp by grasping it by the ceramic base. 4. Carefully insert the new lamp into the socket (Only use a MSR 575/2 GX9.5 lamp or ©Elation Professional® CMY Zoom 575™...

  • Page 12: Lamp Optimization

    The minimum deviation amount is 1.0mm. Running the fixture within a lower deviation can cause damage to the lamp and/or lens. The CMY Zoom 575™ lamp holder is aligned at the factory. However, due to slight imperfections in all lamps, fine adjustments will improve light performance. Please follow the procedure below for proper lamp optimization: 1.
  • Page 13 ("1, 2, 3”) counterclockwise turn until the light is bright and evenly distributed. Please remember that a MSD 575/2 lamp is not a hot-restrike lamp therefore, you should wait at least 15 minutes before attempting to strike the lamp once it has been turned off. ©Elation Professional® CMY Zoom 575™...

  • Page 14: Mounting And Installation

    0,5m Mounting The CMY ZOOM 575™ is fully operational in three different mounting positions, hanging upside-down from a ceiling, side mounted, or set on a flat level surface (see illustration below). Be sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.).

  • Page 15: Mounting Points

    CMY Zoom 575™ Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt the installation yourself.

  • Page 16: Securing

    Securing the CMY ZOOM 575™ Regardless of the rigging option you choose for your CMY ZOOM 575™ always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above.

  • Page 17: Understanding Dmx

    CMY Zoom 575™ 7. Understanding DMX Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): Your fixture and your DMX controller require a standard 3-pin XLR connector for data input and data output (see figure below). If you are constructing your own cables be sure to use two conductor shielded digital cable rated at a 120 ohms (this cable can be purchased at almost all professional sound and lighting stores).

  • Page 18: Dmx Terminator

    CMY Zoom 575™ other side to the male 3-pin XLR input of the moving head (Please refer to the diagram below.). You can chain multiple moving heads together through serial linking. The cable needed should be two conductor, shielded cable with XLR input and output connectors.

  • Page 19: 3-Pin To 5-Pin Conversion

    In the case of the CMY Zoom 575™, which is a 11 channel fixture, you should set the starting DMX address of the first unit to 1, the second unit to 12 (11 + 1), the third unit to 23 (11 + 12), and so on.
  • Page 20 DMX input jack. The DMX controller is switched off or defective. The DMX cable or connector is defective. A DMX terminator has been inserted into the last fixture in your DMX chain. ©Elation Professional® CMY Zoom 575™...

  • Page 21: Display Led Indicators

    8. DISPLAY LED INDICATORS The CMY Zoom 575™ has two LED indicators on the display. These indicators are designed to give a quick visual indication of the fixtures’ status. The illustration below details the functionality of the LED indicators. DMX OK...

  • Page 22: Fixture Menu

    9. FIXTURE MENU On-Board System Menu: The CMY ZOOM 575™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu. LED Control Panel: The control panel located on the top, front of the fixture allows you to access the main menu and make all necessary adjustments to the CMY Zoom 575™.
  • Page 23 T XXX(001~999) CEDT ON/OFF RE.XX ON/OFF Fixture code *code is “C050” Motor Fix Set the amount of your program Edit the channels of each scene Time for each scene Edit program via controller Auto Save Program test CMY Zoom 575™...

  • Page 24: Menu Functions

    DMX signal the display will flash continuously. To set or adjust a DMX address, please follow the procedure below: 1. Switch on the CMY ZOOM 575™ and wait for the fixture reset process to finished. 2. Press the Mode/Esc button to access the main menu. Toggle through the menu by pressing the Up and Down buttons until the display shows A001.
  • Page 25 1. Access the main menu. 2. Tap the UP or DOWN button until “PLAY” is displayed, press ENTER. 3. Tap the UP or DOWN button until “AUTO” is displayed, press ENTER. ©Elation Professional® CMY Zoom 575™...
  • Page 26 2. Tap the UP button until “RESE” is displayed, press ENTER. 3. Tap the UP button until “ALL” is displayed in the LCD then press ENTER to confirm and begin the reset process. 4. Press MODE/ESC to return to the main menu. ©Elation Professional® CMY Zoom 575™...
  • Page 27 4. Press MODE/ESC to return to the main menu. OTHR - When you activate this reset function, the fixture will only reset any motor not specified in the previous reset commands. 1. Access the main menu. ©Elation Professional® CMY Zoom 575™...
  • Page 28 - With this function you can clear the running time of the lamp. clear the lamp time every time you replace the lamp. 1. Access the main menu. 2. Tap the UP button until “TIME” is displayed, press ENTER. ©Elation Professional® Note: Please CMY Zoom 575™...

  • Page 29: Display Menu

    6. Press MODE/ESC to return to the main menu. D ON – This function will turn the display of seconds without any activity. 1. Access the main menu. ©Elation Professional® f after the unit has gone two CMY Zoom 575™...
  • Page 30 VER (Version) - Displays the software version. ADJU – Calibration functions LAAU – This function controls the automatic lamp start feature. By default the unit will automatically ignite the lamp when unit is turned on. Use this function to turn this ©Elation Professional® CMY Zoom 575™...
  • Page 31 256 and 511. 3. Use channel 3 to set your desired DMX starting address. For example: If you want to set the starting address to 57, set channel 1 to a value of “7,” set channel ©Elation Professional® CMY Zoom 575™...
  • Page 32 7. Press MODE/ESC to return to the main menu. SPOT – This function allows you to optimize the lamp without the use of an external DMX controller. In this mode, the device will not react to any control signal. ©Elation Professional® CMY Zoom 575™...
  • Page 33 1. Access the main menu. 2. Tap the UP or DOWN button until “SPEC” is displayed, press ENTER. 3. Tap the UP or DOWN button until “FANS” is displayed, press ENTER. 4. The display will show “HIGH/AUTO”. ©Elation Professional® CMY Zoom 575™...
  • Page 34 8. Adjust the desired calibration value between –128 and 127 by pressing the UP and DOWN. As you scroll up and down through the calibration values you will notice slight changes in the wheel or motor you are attempting to calibrate. ©Elation Professional® CMY Zoom 575™...
  • Page 35 6. When you reach the scene number you wish to store the scene to, press ENTER to confirm and lock the scene into the fixture’s memory. 7. Press MODE/ESC to return to the main menu. ©Elation Professional® CMY Zoom 575™...
  • Page 36 4. Press ENTER, the display will show “C-01,” this represents the channel number. If “C-01” is displayed, you will be editing the fixture’s channel 1 value of the selected scene, press ENTER. You can change the channel number by tapping the UP button. ©Elation Professional® CMY Zoom 575™...
  • Page 37 Press MODE/ESC, the display shows “C-01”. Select "CEDT" by pressing the UP or DOWN buttons. Press MODE/ESC, the display shows "OFF". Press UP, the display will read "ON". Press MODE/ESC, the display shows "SC02". You successfully downloaded ©Elation Professional® CMY Zoom 575™...
  • Page 38 4. The display will then read either ON or OFF. 5. Use the UP button to toggle between the “ON” and “OFF” commands. Select a mode, and press ENTER to confirm. Press MODE/ESC to return to the main menu. ©Elation Professional® program. You can set CMY Zoom 575™...

  • Page 39: Dmx Channel Traits

    CMY Zoom 575™ . DMX CHANNEL TRAITS The chart below details the channel layout for 11 DMX channels. CHANNEL 1: Color Wheel CHANNEL 2: Cyan Filter CHANNEL 3: Magenta Filter CHANNEL 4: Yellow Filter CHANNEL 5: Strobe Control CHANNEL 6: Mechanical Dimmer CHANNEL 7: Effect Wheel (Beam Shape, Frost Filter) CHANNEL 8: Zoom (7˚...

  • Page 40: Dmx Channel Values

    192-223 Random strobe effect slow to fast 224-255 No function (shutter open) Channel 6 – Dimmer intensity: 0-255 Gradual adjustment of the dimmer intensity from 0-100% Channel 7 - Effect wheel: 0-70 Full beam 71-230 Beam shaper 231-255 Frost filter ©Elation Professional® CMY Zoom 575™...
  • Page 41 232-239 Macro 29 240-247 Macro 30 248-255 Random CMY Color Mixing Channel 10 - Speed Of CMY And Dimmer : 0-225 Speed Max _>Min 226-235 No function 236-245 Max speed and black out by while color change ©Elation Professional® CMY Zoom 575™...
  • Page 42 97-99 Other motor reset 100-119 Internal program 1 120-139 Internal program 2 140-159 Internal program 3 160-179 Internal program 4 180-199 Internal program 5 200-219 Internal program 6 220-239 Internal program 7 240-255 Auto program by music ©Elation Professional® CMY Zoom 575™...

  • Page 43: Error Codes

    CMY Zoom 575™ 11. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer” were as XX will represent a function number.
  • Page 44 CMY Zoom 575™ the reset. ©Elation Professional® CMY Zoom 575™...

  • Page 45: Cleaning And Maintenance

    There are no user serviceable parts inside this fixture with the exception of the lamp. Please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local dealer. ©Elation Professional® CMY Zoom 575™...

  • Page 46: Warranty

    It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the Elation Professional shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation Professional shipping charges only to a designated point within the United States.
  • Page 47 The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall Elation Professional® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

  • Page 48: Photometric Data

    CMY Zoom 575™ 14. PHOTOMETRIC DATA ©Elation Professional® CMY Zoom 575™...

  • Page 49: Dimensional Drawings

    CMY Zoom 575™ 15. DIMENSIONAL DRAWINGS ©Elation Professional® CMY Zoom 575™...

  • Page 50: Circuit Schematic

    CMY Zoom 575™ 16. CIRCUIT SCHEMATIC ©Elation Professional® CMY Zoom 575™...

  • Page 51: Technical Specifications

    Weight (net) 29.5Kgs / 65Lbs Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. ©Elation Professional® [-] = Pin 2 [Ground] = Pin 1. CMY Zoom 575™...
  • Page 52 CMY Zoom 575™ Elation Professional 4295 Charter Street Los Angeles, CA. 90058 323-582-3322 / 323-582-3108 fax www.ElationLighting.com /Info@ElationLighitng.com ©Elation Professional® CMY Zoom 575™...

Table of Contents

Save PDF