Photometric Chart; Troubleshooting - Elation TVL4000 User Instructions

TVL4000
DMX 512 configuration
Mode Mode 1 Mode 2
Ch1 Ch1 Ch1 Ch1 Ch2 Ch2 Ch1
CW CW WW
Color Mix
255
255 100% 255 100%
0% 100%
100% 0%
0 0% 0 0%
0
TVL4000
©Elation Professionals® - www.elationlighting.com - TVL4000 User Manual Page 15
DMX Modes & Traits
Mode 3
Ch1 Ch1 Ch1 Ch1 Ch2 Ch2
Ch2
CW CW
Dimmer WW
255
100% 100% 255 100%
255
0% 0% 0%
0 0 0 0 0 0

Photometric Chart

TVL4000
Fixture Cleaning:
the internal and external optical lenses and mirror should be carried
Ch3
out periodically to optimize light output. Cleaning frequency depends
Dimmer on the environment in which the fixture operates (I.e. smoke, fog
residue, dust, dew). In heavy club use we recommend cleaning on a
255 100%
monthly basis. Periodic cleaning will ensure longevity, and crisp out-
put.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
0 0 0%
back in.
TVL4000
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
1. The unit does not work, no light and the fan does not work
- Check the power connection on both the unit and power source.
2. Not responding to DMX controller
- DMX LED should be on. If not, check DMX connectors and cables
make sure they are linked properly.
- If the DMX LED is on and no response to the channel, check the
address settings
- If you have intermittent DMX signal problems, check the pins on
connectors.
- Try to using another DMX controller.
- Check if the DMX cables run near or run alongside high voltage
cables that may cause damage or interference to DMX interface
cir cuit.
©Elation Professionals® - www.elationlighting.com - TVL4000 User Manual Page 16
Due to fog residue, smoke, and dust cleaning
Trouble Shooting
Cleaning