Setting Ipv6 Addresses - Canon LBP6030w Manual

Setting IPv6 Addresses

Maximum
Type
available
Link-local address
Manual address
Stateless address
Stateful address
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
4
Click [Edit] in [IPv6 Settings].
Downloaded from ManualsPrinter.com Manuals
Use the Remote UI to set IPv6 addresses. Before setting IPv6 addresses, make sure that the IPv4 address has
been set correctly ( Viewing Network Settings). You can register up to nine of the following IPv6
addresses.
number
An address that is valid only within a subnet or link and cannot be used to communicate with
devices beyond a router. A link-local address is set automatically when the IPv6 function of the
1
machine is enabled.
An address that is entered manually. Specify the prefix length and default router address.
1
An address that is generated automatically using the MAC address of the machine and a network
prefix that is advertised by the router. Stateless addresses are discarded when the machine is
6
restarted (or turned ON).
An address obtained from a DHCP server using DHCPv6.
1
[TCP/IP Settings].
Description
Starting the Remote UI
0HWJ-024