Canon LBP6030w Manual page 253

Reset the wireless LAN settings.
When you need to manually set up the connection
If the wireless router is set up as described below, enter the required information manually.
The stealth function is enabled.
ANY connection refusal is enabled.
The WEP key number to use is set to a number from 2 to 4.
The automatically generated WEP key (hexadecimal) is selected.
*
A function in which the wireless router refuses the connection if the SSID of the device to be connected is set to "ANY" or is blank.
When you need to change the settings of the wireless router
If the wireless router is set up as described below, change the settings of the router.
MAC address filtering is enabled.
When only IEEE 802.11n is used for the wireless communication, WEP is selected or the WPA/WPA2 encryption method is
set to TKIP.
Problems with the USB Connection
Installation does not start.
Is the printer turned ON?
Are the printer and the computer connected correctly via a USB cable?
Connecting via USB
Was the printer turned ON before you installed the printer driver? If so, turn OFF the printer and unplug the USB cable, and
then reinstall the printer driver.
Installing
Always turn ON the printer when the following screen is displayed.
First delete the USB class driver, and then reinstall the printer driver.
Deleting the USB Class Driver
Installing
Problems via the Print Server
You cannot find the print server to connect to.
Are the print server and computer connected correctly?
Is the print server running?
Do you have user rights to connect to the print server? If you are not sure, consult the print server's administrator.
Is [Network discovery] enabled? (Windows Vista/7/8/Server 2008/Server 2012)
Downloaded from ManualsPrinter.com Manuals
Configuring Wireless LAN Network Settings
*