Canon LBP6030w Manual page 233

1
Select [Standard], select the [Reactivate Printers in the Sleep Mode and Search] check box, and click
[Next].
If you are using the printer in an IPv6 environment, click [Detailed Settings]
click [OK].
About [Detailed Settings]
You can select the port type.
[MFNP Port] (only for IPv4 environment)
This is a port that enables automatic detection of the printer's IP address. Even if the IP address of the printer is
changed, the connection between the printer and computer will be maintained, provided that they belong to the
same subnet. Therefore, you do not need to add a new port every time the IP address is changed. If you are
using the printer in an IPv4 environment, choose this setting.
[Standard TCP/IP Port]
This is a standard Windows port. Whenever the IP address of the printer is changed, a new port must be added.
2
Select check box for the printer that you want to install from the [Printer List].
If you want to use the printer in an IPv6 environment, click the [IPv6 Devices] tab.
If the [Select Process] screen is displayed
If a printer driver is already installed, the [Select Process] screen is displayed before the [Select Printers to
Install] screen. For your printer, the selection made here makes no difference for the setup process. Simply click
[Next].
If the [IPv6 Devices] tab is not displayed
Return to the previous screen, and click [Detailed Settings]
If the printer that you want does not appear in [Printer List]
Problems with the Wireless LAN Connection
3
Select the [Set Printer Information] check box, and click [Next].
Downloaded from ManualsPrinter.com Manuals
select [Standard TCP/IP Port]
select [Standard TCP/IP Port].