Canon LBP6030w Manual page 93

[Use SNTP]
Select the check box to use SNTP for synchronization. Clear the check box if you do not want to use this function.
[NTP Server Name]
Enter the IP address of the NTP or SNTP server. If a DNS server is available on the network, you can enter "<host
name>.<domain name>" (FQDN) of up to 255 alphanumeric characters instead (example: "ntp.example.com").
[Polling Interval]
Enter an interval from 1 to 48 hours to specify how often to poll the time server.
6
Click [OK].
Testing communication with the NTP/SNTP server
You can test whether the machine is communicating with the registered time server via SNTP. Click [Settings/Registration]
[Network Settings]
been established, the result is displayed as shown below. (Note that this operation only checks the connection. It does not adjust
the system clock.)
Synchronizing to the time set on the computer
You can notify the machine of the time set on your computer, and synchronize to that time. Make time notification settings in
the Printer Status Window.
1
Select the machine by clicking
2
Select [Options]
3
Select the [Notify the Printer of the Time] check box and click [OK].
Downloaded from ManualsPrinter.com Manuals
[TCP/IP Settings] to display [SNTP Settings], and then click [Check NTP Server]. If a proper connection has
[Preferences (Administrators)].
in the system tray.