Configuring Slp Communication With Imageware - Canon LBP6030w Manual

Configuring SLP Communication with imageWARE

You can use device management software such as imageWARE Enterprise Management Console to facilitate the collection and
management of various information about networked devices. In an environment where such software is installed, information about
device settings and errors is collected via a server on the network. If the machine is connected to an imageWARE network, imageWARE
searches the network for the machine by using protocols such as Service Location Protocol (SLP). SLP settings can be specified via the
Remote UI.
*
For more information about imageWARE, contact your local authorized Canon dealer.
To change the SLP port number
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
4
Click [Edit] in [Multicast Discovery Settings].
Downloaded from ManualsPrinter.com Manuals
Changing Port Numbers
[TCP/IP Settings].
*
Starting the Remote UI
0HWJ-02L