Canon LBP6030w Manual page 109

[LPD]/[RAW]
Change the port used for LPD printing or RAW printing. For details about each protocol, see Configuring Printing Protocols
and Web Services.
[HTTP]
Change the port used by HTTP. HTTP is used for communications over the network, such as when you access the machine via the
Remote UI.
[SNMP]
Change the port used by SNMP. For details about SNMP, see Monitoring and Controlling the Machine with SNMP.
[WSD Multicast Discovery]
Change the port used for WSD multicast discovery. For details about WSD, see Configuring Printing Protocols and Web
Services.
[Multicast Discovery]
Change the port used for SLP multicast discovery. For details about SLP, see Configuring SLP Communication with
imageWARE.
6
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
LINKS
Configuring Printer Ports
Downloaded from ManualsPrinter.com Manuals