Instructions On Connecting And Disconnecting Cables - Fujitsu FibreCAT TXF Operating Manual

Instructions on connecting and disconnecting cables

3.8 Instructions on connecting and
disconnecting cables
V
CAUTION!
The power plug must be pulled out!
Never connect or disconnect cables during thunderstorms.
When disconnecting a cable, always take hold of the plug. Never unplug
a cable by pulling at the cable itself.
Connecting cables
Connect the cables in the order described below:
● Switch off all affected devices.
Unplug all affected devices from the power supply.
●
Ê Mark the cables and make a note of the function of each cable. Always note
the safety instructions in
Ê Connect the power plugs to appropriately properly grounded power outlets.
Ê If the devices have an articulated cable guide, secure the cables to the artic-
ulated cable guide with the cable ties.
Disconnecting cables
Disconnect the cables in the order described below:
Ê Turn off all power and equipment switches.
Ê Disconnect all power plugs from the power outlets.
Ê Disconnect all cables on the server and the backup subsystem.
38
chapter "Important information" on page
Operating Manual
Installation
11.
FibreCAT TXF