Icom IC-F3210D Operating Manual page 23

Push [Digital Button] again to enter the destination ID se-
t
lection mode.
• The preprogrammed ID name is displayed.
• When the ID name is not programmed, the ID code is displayed.
• The primary ID can be preset to display first.
Push [CH Up] or [CH Down] to select the desired ID name
y
(or ID code).
For the IC-F3230D/F4230D series transceivers
For the IC-F5220D/F6220D series transceivers
Push [PTT] to transmit the status message to the selected
u
station or talkgroup.
• "STAT TX" is displayed.
Release [PTT].
i
• "STAT OK" is displayed after receiving an acknowledgement
from the targeted station.
• "STA FAIL" is displayed if there is no acknowledgment from the
targeted station.
o After a specified time period has passed, the transceiver
will return to receive.
2
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
21