Table Of Contents; Important - Icom IC-F3210D Operating Manual

IMPORTANT

Thank you for purchasing this Icom transceiver.
The IDAS™ NXDN™ functions are built into your IC-F3210D/
F4210D/F3230D/F4230D/F5220D/F6220D series transceiv-
er.
READ ALL INSTRUCTIONS
before using the transceiver.
SAVE THIS OPERATING GUIDE
guide contains important oper ating instructions for:
• IC-F3210D, IC-F3230DT, IC-F3230DS, IC-F5220D VHF
DIGITAL TRANSCEIVERS
• IC-F4210D, IC-F4230DT, IC-F4230DS, IC-F6220D UHF
DIGITAL TRANSCEIVERS
INFORMATION: The 10-key pad of the optional DTMF mi-
crophone (HM-148T) has only the DTMF code transmitting
capability, so an ID and message cannot be input with this
microphone.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
IDAS and IDAS logo are trademarks of Icom Incorporated (Japan).
NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation.
All other products or brands are registered trademarks or trademarks of their
respective holders.
i
carefully and completely
- This operating

TABLE OF CONTENTS

IMPORTANT .......................................................................... i
TABLE OF CONTENTS ......................................................... i
1 PREPARATION............................................................1-7
Programmable key functions
■
2 IDAS OPERATION ....................................................8-29
IDAS operation .............................................................8
■
Receiving a call ............................................................9
■
Transmitting a call ......................................................16
■
Position data transmission
■
Status message transmission
■
Encryption function ....................................................27
■
Auto CH Reserve function ..........................................28
■
Talk Back function ......................................................28
■
Roaming function (Multi-site Trunking mode only) ........29
■
Site Lock function (Multi-site Trunking mode only) ........29
■
Site Select function (Multi-site Trunking mode only) .....29
■
........................................1
.........................................27
....................................27