Vlan Routing Wizard - NETGEAR GS748T Software Administration Manual

VLAN Routing Wizard

The VLAN Routing Wizard allows you to create a VLAN routing interface, configure the IP
address and subnet mask for the interface, and add selected ports or LAGs to the VLAN.
With this wizard, you can:
• Create a VLAN.
• Add selected ports to the newly created VLAN and remove selected ports from the
default VLAN.
• Add selected LAGs to the newly created VLAN.
• Enable tagging on selected ports if the port is in another VLAN. Disable tagging if a
selected port does not exist in another VLAN.
• Exclude ports not selected from the VLAN.
• Enable routing on the VLAN using the IP address and subnet mask entered.
To display the page, click Routing
To use the wizard to configure VLAN routing:
1. Specify the VLAN ID in the appropriate field. The VLAN Identifier (VID) associated with
this VLAN. The range of the VLAN ID is (1 to 4093).
2. Specify the IP address of the VLAN routing interface.
3. In the Network Mask field, specify the subnet mask to associate with the IP address.
GS748T Smart Switch
IP, and then click the VLAN Routing Wizard link.

131