Specifications - FUNAI HT2-M200 Owner's Manual

Specifications

Signal system
Power requirements
Power consumption
Total output power (Amplifier)
Dimensions (width x height x depth)
Weight
Operating temperature
Operating humidity
SD card slot
slot x 1
MP3 LINE-IN jack
mini jack x 1
Analogue audio output
(SPEAKERS (4Ω))
front and rear speakers
centre speaker
subwoofer
Video output
RCA jack x 1
Component video output
RCA jack x 3
Analogue audio input (AUX)
RCA jack x 2
Digital audio input (Coaxial)
RCA jack x 1
HDMI output
HDMI jack x 1
LAN terminal
RADIO
FM ANT jack × 1
Note
• The specifications and design of this product are subject to change without notice.
56
OTHERS
General
NTSC/PAL colour
220 - 240 V AC, 50 Hz
70 W (standby: 0.7 W)
Home theater mode: 1000 W
FTC* output power: 700 W
*(Main Ch @ 1 kHz within 10% THD, Sub Ch 60 Hz within 2.5% THD)
435 x 59 x 297 mm
Total weight: 12.50 kg
Main unit: 3.70 kg
5°C to 40°C
Less than 80 % (no condensation)
Terminals
500 mVp-p (75Ω)
System: Full range satellite
Impedance: 4Ω
Frequency response: 180 Hz ~ 20 kHz
Dimensions: 100 x 130 x 100.5 mm
Weight: front - 0.54 kg
rear - 0.51 kg
System: Full range satellite
Impedance: 4Ω
Frequency response: 180 Hz ~ 20 kHz
Dimensions: 100 x 130 x 100.5 mm
Weight: 0.73 kg
Impedance: 4Ω
Speaker drivers: 160 mm woofer
Frequency response: 60 Hz ~ 150 Hz
Dimensions: 149.5 x 310.5 x 308 mm
Weight: 3.76 kg
1 Vp-p (75Ω)
Y: 1 Vp-p (75Ω) P : 700 mVp-p (75Ω) P
B
L/R:2 Vrms (47kΩ)
500 mVp-p (75Ω)
Video: 480p/576p, 720p, 1080i, 1080p, 1080p24 / Audio
10BASE-T / 100BASE-TX
Tuning range: FM 87.5 - 108 MHz (100kHz)
Antenna terminal: 75Ω (unbalanced)
: 700 mVp-p (75Ω)
R
EN