Table of Contents
Advertisement
Note
• The secondary audio will not be output when the
secondary video is not displayed or when "BD Audio
Mode" is set to "HD Audio Output". (For some BD,
secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
• [AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If you select a language that has a 3-letter-language
code, the code will be displayed every time you
change the audio language setting. If you select any
other languages, "---" will be displayed instead.
(Refer to page 55)
• If 4-digit-language code appears in the audio menu,
refer to page 55.
• If the disc has no audio language, "Not Available" will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
Setting the BD Audio Mode
There are 2 options for the "BD Audio Mode" setting; either
by setting the output to the secondary and interactive
audio accompanied by the primary audio or by setting
only the primary audio. Depending on the setting of the
mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, or DTS-HD output changes between multi LPCM and
Bitstream.
1
In stop mode with BD inserted, press [MODE].
2
Use [K / L] to select your desired setting.
BD Audio Mode
"Mix Audio Output":
If it is available, BD-video's secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director's comment etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
"HD Audio Output":
Only the primary audio will be output. Set this mode in
order to output , Dolby Digital Plus, Dolby TrueHD, or
DTS-HD audio of BD through HDMI connection.
3
Press [RETURN] to exit.
30
PLAYBACK
Mix Audio Output
Note
• In "Mix Audio Output" mode, if there is no secondary
and interactive audio, the audio will be output as
"HD Audio Output" mode.
• You can also set "BD Audio Mode" from the setup
menu. Refer to page 39.
• Refer to "Audio Output" on page 43 for how BD
Audio will be output.
Volume Control
You can control the volume level of the audio output from
5.1ch speakers.
To increase or decrease the volume level :
Press [VOL. + / –].
• The volume level will increase or decrease, every time
you press [VOL. +] or [VOL. –].
• The volume level will be displayed on the front panel
display.
To turn off the volume temporarily :
Press [MUTE].
• To restore the volume, press [MUTE] again or press
[VOL. + / –].
• "MUTE" will be displayed on the front panel display.
Note
• This function is only available for the audio output
from 5.1ch speakers.
• Pressing [VOL. + / –] does not work while the setup
menu is displayed.
• If you turn up the volume too much, the audio may
get distorted. To enjoy clear sounds, please turn
down the volume.
EN
Advertisement
Table of Contents
