Table of Contents
Advertisement
File name information
File_name_001
1
1. Media icon and file name
®
: DivX
files
: WMA files
Tag information
<Title name information>
TITLE
1
<Artist name information>
ARTIST NAME
2
1. Title name based on tag information of current
Windows Media™ Audio file
2. Artist name based on tag information of current
Windows Media™ Audio file
Decoding format information
Dolby Digital
1
1. Decoding format
EN
PLAYBACK
1
2
: MP3 files
: JPEG files
• Make sure the disc is compatible with this unit. (Refer to
3
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray.
Remove the disc.
Press [OPEN/CLOSE A] to close the disc tray.
For the playback media to be read by this unit, the correct
media mode should be selected. You can switch the media
mode by following the steps below.
1
2
3
4
5
How to Insert a Disc
Press [OPEN/CLOSE A] to open the disc tray.
Place the disc on the disc tray with its label
side facing up.
page 16 for the list of compatible discs.)
Press [OPEN/CLOSE A] to close the disc tray.
It may take a while to load the disc.
Selecting the Media Mode
In stop mode, press [SETUP].
Use [K / L] to select
Use [K / L] to select "Mode Select", then press
[ENTER].
Use [K / L] to select the desired media, then
press [ENTER].
Press [SETUP] to exit.
Note
• Even if you set the media mode to "SD Card" or
"Network", the setting will be switched to "Disc" in
following cases :
- If you turn the unit into the standby mode.
- If you change the active source mode to "Aux",
"Coaxial", "MP3 Line-in" or "FM" mode.
• "SD Card" can be selected only when an SD Memory
Card is inserted into the SD CARD slot.
Align the disc to the
disc tray guide.
, then press [ENTER].
19
Advertisement
Table of Contents
