Table of Contents
Advertisement
Maintenance
Cleaning the Unit
Use a soft cloth slightly moistened with a mild detergent
solution. Do not use solutions containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
If a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the centre out. Do not wipe in a circular
motion.
Do not use solvents such as benzine, thinners,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analogue
records.
Disc Handling
Handle the discs so that fingerprints and dust do not
adhere to the disc surfaces.
Always store the disc in its protective case when it is not in
use.
Servicing
If the unit becomes inoperative, do not try to correct the
problem by yourself. There are no user serviceable parts
inside. Turn the unit off, unplug the mains cable, and
consult your dealer or an authorised service centre.
Cleaning the Disc Lens
If the unit does not perform correctly even though you
have referred to "Troubleshooting" and the relevant
sections in the Owner's Manual, the laser optical pickup
unit may be dirty. Consult your dealer or an authorised
service centre for inspection and cleaning of the laser
optical pickup unit.
IR Signal Check
If the remote control is not working properly, you can use a
digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
With a digital camera
(including built-in cell phone cameras):
Point a digital camera towards the remote
control. Push any button on the remote
control and look through the digital
camera. If the infrared light appears
through the camera, the remote control is
working.
4
INTRODUCTION
EN
Advertisement
Table of Contents
