Table of Contents
Advertisement
4
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The range of input numbers for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, certain ports might be closed,
blocked or unusable depending on your network
environment.
Connection Speed
You can set connection speed as your preference. (The
default setting is "Auto".)
1
Follow steps 1 to 4 in "Connection Test" on
page 46.
2
Use [K / L] to select "Enable(Custom)", then
press [ENTER].
3
Use [K / L] to select "Connection Speed", then
press [ENTER].
4
Use [K / L] to select the desired setting, then
press [ENTER].
"Auto":
Set the appropriate connection speed automatically, in
accordance with your network environment.
"10BASE Half":
Set the connection speed to "10BASE Half".
"10BASE Full":
Set the connection speed to "10BASE Full".
"100BASE Half":
Set the connection speed to "100BASE Half".
"100BASE Full":
Set the connection speed to "100BASE Full".
5
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
48
FUNCTION SETUP
BD-Live Setting
You can limit Internet access for BD-Live discs.
(The default setting is "Allow".)
1
Follow steps 1 to 4 in "Connection Test" on
page 46.
2
Use [K / L] to select "Enable(Custom)", then
press [ENTER].
3
Use [K / L] to select "BD-Live Setting", then
press [ENTER].
4
Use [K / L] to select the desired setting, then
press [ENTER].
"Allow":
Internet access is permitted for all BD-Live contents.
"Limited Allow":
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates is prohibited.
"Prohibit":
Internet access is prohibited for all BD-Live contents.
5
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Disable
Deactivate all the network connection and settings.
1
Follow steps 1 to 4 in "Connection Test" on
page 46.
2
Use [K / L] to select "Disable", then press
[ENTER].
3
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The network connection can be reactivated by
setting the network connection to "Enable(Easy)" or
"Enable(Custom)".
EN
Advertisement
Table of Contents
