Mercedes-Benz SL Operator's Manual page 449

To exit the menu: press the V eject/
X
load button again or press the k back
button.
or
Select Back Back by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
To fill empty magazine trays: press the
X
V load/eject button.
The magazine menu appears.
Select Fill Empty Slots Fill Empty
X
You see the Please Wait... Please Wait...
COMAND switches to the next free
magazine tray. You then see the
insert disc <x> insert disc <x> message.
i
Do not insert a disc into the magazine tray
until you have seen this prompt.
Insert a disc into the disc slot with the
X
printed side facing upwards.
You see the Please Wait... Please Wait...
Once the disc is loaded, the DVD changer
switches to the next empty tray. You see
the Please insert disc <x> Please insert disc <x>
Repeat this step until all trays are loaded.
X
The DVD changer plays the last disc you
loaded if it has been inserted correctly and
it is a permissible type.
To cancel loading: press the V eject/
X
load button again or press the k back
button.
i
If you cancel loading with the k back
button, the system loads and plays the last
CD you inserted.
Ejecting discs from the DVD changer
If you remove one disc while playing another
disc, the DVD changer interrupts playback.
Playback continues once the disc has been
ejected.
To eject a CD/DVD: press the V load/
X
eject button.
The magazine menu appears. The magazine
tray with the current disc is highlighted.
Slots.
message.
Please Please
message.
message.
Eject possible
:
Type of data medium
;
Disc name (only if stored on the disc)
=
Current disc
?
Select a magazine tray containing a disc by
X
turning cVd the COMAND controller and
press W to confirm.
or
Press a number key, e.g. j.
X
You see the message:
<x>.... You then see the following <x>...
message:
Take the disc out of the slot.
X
If you do not take the disc out of the slot,
COMAND will draw it in automatically after
a short while and load it again.
Audio
447
Ejecting disc Ejecting disc
Z