Mercedes-Benz SL Operator's Manual page 440

Audio
438
Directly in the station presets: select
X
Presets Presets by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
or
When the display/selection window is
X
active, press W the COMAND controller.
The station preset memory appears. The
# dot indicates under which preset the
currently selected station is stored.
Select a station by turning cVd and
X
pressing W to confirm or press a number
key, e.g. l.
Selecting stations by entering the
frequency manually
Option 1: press the l button.
X
Option 2: select
X
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
Select Enter Frequency Enter Frequency
X
confirm.
Irrespective of the option chosen, an input
menu will appear.
Enter a frequency using the number keys.
X
COMAND sets the frequency entered.
Waveband
AM (MF)
FM (VHF)
WB (Weather Band)
i
You can only enter currently permitted
numbers.
i
If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND sets the next lower
frequency.
Radio Radio in the radio display
and press W to
Frequency
530 - 1700 kHz
87.7 - 107.9 MHz
Weather report
channels
Storing a station
Storing stations manually
There are ten presets available for the FM and
AM wavebands.
Example: station memory
Quick save: press and hold a number key,
X
e.g. l, until you hear a tone.
The station is stored.
Directly in the station presets: press W
X
the COMAND controller when the display/
selection window is active.
or
Select Presets Presets by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
In both cases, the station presets appear.
The # dot indicates under which preset
the currently selected station is stored.
Select a preset by turning cVd the
X
COMAND controller and press and hold
W until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND stores any stations found,
beginning with preset 1. When the highest
frequency is reached or 10 stations have
been found, the storing process ends. Any
stations stored manually under the presets