Mercedes-Benz SL Operator's Manual page 391

Option 2: use Secure Simple Pairing
The mobile phone (or the Bluetooth
device) must support the Bluetooth
2.1 for connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on both devices that are to be
connected.
If the code is the same on both devices,
X
confirm Yes Yes by pressing W.
If you select Yes Yes, authorization is continued
and the mobile phone is connected.
If you select No No, the process will be
canceled.
Confirm the message on the mobile phone.
X
External authorization
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
you can test if your mobile phone can find
COMAND. The Bluetooth
COMAND is "MB Bluetooth MB Bluetooth".
Please note the following: some mobile
phones require that you establish the
®
audio
®
version
®
device name of
connection to COMAND again once you have
entered the passkey (see the mobile phone
operating instructions). The mobile phone
cannot otherwise be authorized.
Press the % function button on
X
COMAND.
Select Connect Dev. Connect Dev.
X
basic menu by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
®
The Bluetooth telephone list appears.
Select Connect via Phone Connect via Phone
X
to confirm.
The message on the left appears.
®
Start the Bluetooth
X
phone; see the mobile phone operating
instructions.
Select COMAND (MB Bluetooth MB
X
mobile phone.
Option 1: when requested to do so, enter
X
the passkey first on the mobile phone and
then in COMAND.
Option 2: confirm the displayed codes on
X
the mobile phone and in COMAND (Secure
Simple Pairing).
With both options, you see the prompt
you want <device name> to be you want <device name> to be
authorized? authorized? on the COMAND display.
If you select Yes, the mobile phone will be Yes
X
authorized. The messages
a Connection to <name of B-tooth a Connection to <name of B-tooth
dev.>... dev.>... and Connecting Bluetooth Connecting Bluetooth
Profiles... Profiles... are displayed. If the
connection is successful, you see the
telephone basic menu and the connected
mobile phone is entered.
If you select No, the process will be No
canceled.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
Select the mobile phone in the Bluetooth
X
telephone list by turning cVd the
Telephone
in the telephone
and press W
search on the mobile
Bluetooth) on the
Do Do
Waiting for Waiting for
®
Z
389