Mercedes-Benz SL Operator's Manual page 307

Option 2:
Slide ZV the COMAND controller
X
repeatedly until the character bar
disappears.
Select the data field by sliding ZVÆ and
X
press W to confirm.
Storing the entry
After making an entry in the input
X
menu, e.g. to create a new
entry( page 399): select the ¬
Y
symbol in the character bar by turning
cVd the COMAND controller and press
W to confirm.
The entry is stored in the address book.
Further functions available in the
character bar
Changing the language of the character
bar
While making an entry in the input menu
( page 399):
Y
Select B and press W to confirm.
X
Select a language by turning cVd the
X
COMAND controller and press W to
confirm.
Switching the character bar to letters
While making an entry in the input menu, e.g.
to create a new entry (
Select the * (upper case) or E
X
(lower case) symbol and press W to
confirm.
Changing the character set
While making an entry in the input menu
( page 399):
Y
page 399):
Y
Select the p symbol and press W to
X
confirm.
ABC ABC (upper/lower case)
R
123 123 (digits)
R
Other Other (special characters such as @, €,
R
etc.)
Moving the cursor to the next data field
Cursor (repositioned)
:
2 and 3 symbol to reposition the
;
cursor
While making an entry in the input menu
( page 399):
Y
Select the 2 or 3 symbol and press W
X
to confirm.
Deleting a character/an entry
While making an entry in the input menu
( page 399):
Y
To delete characters: press the $
X
button on the control panel.
or
Select the 2 symbol by sliding VÆ and
X
turning cVd the COMAND controller and
press W to confirm.
or
Press the 2 button next to the
X
COMAND controller.
To delete an entry: press and hold the
X
$ button on the control panel until the
entire entry has been deleted.
or
At a glance
305
Z