Electrical Wind Screen - Mercedes-Benz SL Operator's Manual

Roof
106
Installing/removing
Rear brackets for wind screen
Bracket cover, front-passenger side
:
Bracket cover, driver's side
;
To install: open the roof (
X
Press the mark on cover : and push in the
X
direction of the arrow.
Repeat the procedure with cover ;.
X
The rear brackets for wind screen = are
visible.
Wind screen
=
Pin
?
Front brackets for wind screen
A
Lock cover (example: front-passenger
B
side)
Make sure that wind screen = is folded
X
back.
Push the upper half of cover B on wind
X
screen =.
Repeat the procedure with the cover on the
X
driver's side.
Wind screen = is unlocked.
X
X
X
X
X
X
page 102).
Y
X
X
X
X

Electrical wind screen

Important safety notes
G
If you use the wind screen in darkness or in
other conditions offering poor visibility, your
view to the rear is further impaired. There is a
risk of an accident.
Only use the wind screen when visibility
conditions are good.
! When extending or retracting the wind
The wind screen offers protection from the
wind when driving with the roof down. The
Hold wind screen = at an angle and insert
pins ? into the rear brackets.
Make sure that pins ? sit correctly in the
brackets.
Insert wind screen = into front brackets
A.
Check whether wind screen = is correctly
seated in all four brackets.
Push the lower half of cover B on wind
screen =.
Wind screen = is locked.
Fold wind screen = forward if necessary.
To remove: make sure that wind screen
= is folded back.
Push the upper half of cover B on wind
screen =.
Wind screen = is unlocked.
First remove wind screen = from front
brackets A.
Hold wind screen = at an angle and then
remove from the rear brackets.
Slide covers : and ; of the rear brackets
against the direction of the arrow until they
are fully closed.
WARNING
screen, make sure there are no objects on
the rear compartment trim. Otherwise, the
objects could damage the wind screen.