Mercedes-Benz SL Operator's Manual page 367

Recalculating the route dynamically
The route types Dynamic Route Dynamic Route
Dynamic Route Dynamic Route Only Only After
all relevant traffic messages into account
when calculating a route (
If you have set the route type
Route, COMAND guides you on the updated Route
route to your destination.
If you have set the route type
Route Only After Route Only After Request Request, a prompt
appears.
You can now decide whether to:
accept the route suggested by COMAND
R
continue your original route
R
To accept the suggested route: press
X
W the COMAND controller.
To continue along the original route:
X
select Reject Reject by turning cVd the
COMAND controller and press W to
confirm.
Destination memory
Home address (My Address)
Entering the home address via address
entry
Proceed as described under "Adopting an
X
address book entry as a home address"
( page 365). Confirm
Y
pressing W.
To enter the home address for the first
X
time: confirm New Entry New Entry
and
After Request Request take
page 325).
Y
Dynamic Dynamic
Dynamic Dynamic
My Address My Address by
by pressing W.
To change the home address: select
X
Change Change in the menu showing the home
address by turning cVd the COMAND
controller and press W to confirm.
Confirm New Entry New Entry
X
In both cases, enter the home address as a
X
destination, e.g. as a city, street and house
number ( page 327). Then, save the home
Y
address ( page 332).
Y
Adopting an address book entry as a
home address
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Destination Destination
X
system menu bar by turning cVd the
COMAND controller and press W to
confirm.
Select From Memory From Memory
X
confirm.
You will see the destination memory list
either with the character bar (option 1) or
as a selection list (option 2).
Option 1: destination memory list with
character bar
Slide VZ the COMAND controller
X
repeatedly until the destination memory
list appears as a selection list.
Option 2: destination memory list as
selection list
Navigation
by pressing W.
in the navigation
and press W to
Z
365