Mercedes-Benz SL Operator's Manual page 441

will be lost. COMAND may not occupy all
memory slots when storing.
Option 1: press W the COMAND controller
X
when the display/selection window is
active.
The station preset memory appears.
Option 2: select Presets Presets
X
and turning cVd the COMAND controller
and press W to confirm.
The station preset memory appears.
Irrespective of the option, select
X
Autostore Autostore and press W to confirm.
In both cases, COMAND searches for
stations that can be received. You will see
a message to this effect. The available
stations are automatically stored in the
preset positions.
To cancel storing: select
X
press W to confirm.
Weather Band
Activating
Press the $ function button repeatedly
X
until the Weather Band is switched on.
or
Select the currently set waveband
X
AM AM by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
Select WB WB from the menu and press W to
X
confirm.
Searching for a channel
Quick select: turn cVd or slide XVY the
X
COMAND controller while the display/
selection window is active.
or
Press the E or F button.
X
Channel search scans up or down and
stops at the next channel found.
Selecting a channel from the channel list
by sliding VÆ
Select
X
cVd the COMAND controller and press
W to confirm.
The channel list appears.
Select a channel by turning cVd the
X
COMAND controller and press W to
Cancel Cancel and
confirm.
or
Press a number key on the control panel,
X
e.g. n, at any time.
Displaying station information
FM FM or
This function is only available for analog FM
programs and digital AM/FM programs (HD
Radio™).
Information relevant to the current station is
shown below the main function bar.
Channel Channel by sliding VÆ and turning
Audio
439
Z