At a glance
298
Using COMAND
Selecting a main function
Address entry menu
Main function bar
:
Situation: switching from navigation mode
(address entry menu) to the system settings.
To switch on navigation mode: press the
X
Ø function button.
To show the menu: press W the COMAND
X
controller.
Select
Destination
Destination
X
turning cVd the COMAND controller and
press W to confirm.
Select
Address Entry
Address Entry
X
confirm.
The address entry menu appears.
Slide ZV the COMAND controller and
X
switch to main function bar :.
Select
System
System
X
turning cVd the COMAND controller and
press W to confirm.
The system menu appears.
by sliding VÆ and
and press W to
in the main function bar by
Selecting the menu of a main function
Example display for audio CD mode and audio
menu (below)
Calls up the audio menu
:
If one of the navigation, audio, telephone or
video main functions is switched on,
triangle : appears next to the entry in the
main function bar. You can now select an
associated menu.
The example describes how to call up the
audio menu from audio CD mode (an audio
CD is playing).