Mercedes-Benz SL Operator's Manual page 383

automatically switch off. This protects the
battery. If this occurs, restart the update
with the engine running.
Insert the DVD:
X
in the single DVD drive (
R
in the DVD changer (
R
COMAND checks whether the digital map
on the DVD is compatible with the
navigation system and system software.
A prompt then appears asking if you want
to install the database. Versions of the
database currently installed and the
database that is to be installed are
displayed.
Select Yes Yes or No No and press W to confirm.
X
After selecting Yes Yes, an activation code
must be entered when installing a database
for the first time. You will receive the
activation code when you buy the
navigation DVD.
If you select No, the process will be No
canceled.
Enter the activation code.
X
After entering the activation code
correctly, COMAND starts updating the
digital map. Once the update is finished,
you will see a message.
To confirm the message: press W the
X
COMAND controller.
Take the DVD out of the slot.
X
While the update is running, you will see a
message to this effect and a progress bar.
The navigation system is not operational
until the update is complete.
i
You cannot eject the DVD during the
update. If you switch off COMAND during
the update, the update is interrupted. It
then continues from where it was
interrupted when the system is restarted.
COMAND may prompt you to change the DVD
during the update.
Press the V (for DVD changer) or
X
8 (for single DVD drive) load/eject
button.
page 446)
Y
page 446)
Y
Take the DVD out of the slot.
X
Insert the requested DVD.
X
Once the update has been successfully
completed, you will see a message to this
effect.
To confirm the message: press W the
X
COMAND controller.
Take the DVD out of the slot.
X
The update is complete.
If the update is not successfully completed,
you will see a message that the map update
is not possible.
To confirm the message: press W the
X
COMAND controller.
Take the DVD out of the slot.
X
Navigation
381
Z