Adjusting The Idle Speed - Wacker Neuson BS 60-2 Operator's Manual

BS 60-2 / BS 70-2
5.6

Adjusting the idle speed

See Graphic: wc_gr007402
5.6.1
5.6.2
5.6.3
5.6.4
wc_tx000926gb.fm
Refer to Technical Data for correct idle and operating rpm. For best
accuracy, use a tachometer when making idle speed adjustments.
Remove the guard (c).
Start the engine and allow it to warm up to operating temperature.
Set the engine idle speed with engine running at idle and choke (a) fully
open. Adjust idle speed screw (b), in or out, to obtain correct idle
speed.
NOTICE: DO NOT turn the adjusting screw in too tight or you may
damage the carburetor.
Reinstall the guard.
35
Maintenance