Screen Displays - Sony HSR-1 Operating Instructions Manual

Locations and Functions of Parts

Screen Displays

1 Recording modes
2 Time mode
3 Recording cycle
4 Image quality mode
5 Camera name
1 Recording modes
When recording or monitoring, the currently selected
mode and recording mode number (REC1 to REC5)
are displayed.
NORMAL: Normal recording
TIMER: Timer recording
ALARM: Alarm recording in Normal mode
INT-A: Alarm recording in Interleave mode
PRE-A: Alarm recording in Prealarm mode
EVT-A: Alarm recording in Event mode
FRM-A: Alarm recording in Frame mode
These items are not displayed during playback.
Whether to display them can be set on the Indication
Control menu.
2 Time mode
When recording or monitoring, the currently selected
Time mode is displayed.
Whether to display it can be set on the Indication
Control menu.
3 Recording cycle
When recording or monitoring, the currently selected
Recording cycle is displayed.
During playback, that used for recording is displayed.
Whether to display it can be set on the Indication
Control menu.
1-10
Chapter 1 Overview
REC1 NORMAL 12 31 1999 FRI
xxxxH xx.xS SUPER ALARM ERRORxx-xxx
ALARM
1 XXXXXXXXXX
11:59:59 AM
HDD
NOT ORIGINAL
4 Image quality mode
When recording or monitoring, the currently selected
Image quality mode is displayed.
During playback, that used for recording is displayed.
Whether to display them can be set on the Indication
Control menu.
5 Camera name
When recording or monitoring, the name specified for
the current camera is displayed.
During playback, the camera name recorded on the
tape is displayed.
The names of the cameras and whether to display them
can be set on the Indication Control menu.
6 Date/time
When recording or monitoring, the current date and
time are displayed.
During playback, the date and time when the picture
was recorded are displayed.
Whether to display them and the display format can be
set on the Indication Control menu.
For the Indication Control Menu, see Chapter 4 "Menu
Operations."
7 HDD indication
If no tape is loaded in the recorder when some
information that has not been recorded on a tape
remains on the HDD, an "HDD" indication flashes.
For details, see "HDD Recording/Playback" on page 3-11.
6 Date/time
7 HDD indication
8 Status indication
9 ALARM indication (upper)
0 ALARM indication (lower)
!¡ NOT ORIGINAL indication