Sony HSR-1 Operating Instructions Manual page 74

2
Highlight SETTING OF REC MODE by pressing
the V or v key, then press the b key.
The menu shifts to selection layer of the recording
mode settings.
SETUP MENU
REC FUNCTION MENU
SETTING OF REC MODE
M REC MODE1
REC MODE2
REC MODE3
REC MODE4
REC MODE5
3
Highlight the recording mode to be set by pressing
the V or v key, then press the b key.
The setting display for the selected recording mode
appears.
Example: Setting display for Recording mode 1
REC MODE 1
CAMERA NUMBER : 8
TAPE LENGTH
IMAGE QUALITY
TIME MODE
REC CYCLE
SHIFT: µ
DATA SET : SET
To set CAMERA NUMBER
Specify the cameras to be used for recording.
1
Highlight CAMERA NUMBER on the setting
display by pressing the V or v key, then press the
b key.
The setting display for CAMERA NUMBER
appears, and the indication for CAM 1 flashes.
m
: 270MIN
: SUPER
: 33H
: 1.00SEC
(1.00)
CHANGE: Mm
MENU : MENU
CAM 1 CAM 2
REC REC
CAM 5 CAM 6
REC REC
CAM 9 CAM 10
REC REC
CAM 13 CAM 14
NO REC NO REC
2
Select the camera to be set by pressing the b (or B)
key.
Each time you press either key, the next (or the
previous) camera is selected, and the indication for
the selected camera flashes.
3
For a camera to be used for recording, set the
indication to REC by pressing the V or v key.
The cameras set to NO REC are not used for
recording.
Repeat steps 2 and 3 for the cameras to be set.
Notes
• Only the cameras that have been set to
CONNECT with CAMERA CONNECTION can
be set to REC.
• When the settings on CAMERA CONNECTION
(page 5-7) are changed, the settings of CAMERA
NUMBER may be automatically changed
according to the CAMERA CONNECTION
settings.
4
Press the SET key to register your setting and
return to the setting display for the recording
modes.
To set other requirements
The REC CYCLE value is automatically calculated
according to the TAPE LENGTH and IMAGE
QUALITY settings. The TIME MODE and REC
CYCLE settings depend on each other, and if either of
them is changed, the other automatically changes in
accordance.
1
Select the item to be set on the recording mode
setting display by pressing the V or v key.
Chapter 5 Connections and Preparations
CAM 3 CAM 4
REC REC
CAM 7 CAM 8
REC REC
CAM 11 CAM 12
REC REC
CAM 15 CAM 16
NO REC NO REC
5-13