Sony HSR-1 Operating Instructions Manual page 37

Alarm Recording
6
Specify the items required for the selected Alarm
recording mode.
For NORMAL/INTERLEAVE/EVENT mode:
Recording mode for alarm recording and Cancel
condition
For PREALARM mode: Recording mode for
alarm recording, Prealarm time and Cancel
condition
Press the V or v key to set, then press the b key to
go to the next item.
No setting is required for FRAME mode.
7
When the settings are completed, press the SET key.
A message "NOW SAVING" is displayed, and the
settings are stored in nonvolatile memory.
The Recording Function menu is resumed.
To activate alarm recording
4 1
S
MENU
LOCK REW PLAY F FWD
º · ‚
◊
ı ∫
CURSOR
REC FRAME STOP FRAME
® æ π ¶ SET/YES RESET/NO
√
5 32
1
Highlight ALARM REC on the third line of the
display shown in step 3 on the previous page, then
press the b key.
The menu shifts to the alarm recording ON/OFF
selection.
SETUP MENU
REC FUNCTION MENU
ALARM REC
ALARM REC
* OFF
M
ON
3-6
Chapter 3 Convenient Recording/Playback Functions
ALARM indication
DIGITAL SURVELLANCE RECORDER HSR-1
†
REC DIGITAL
TIMELAPSE
EJECT
§
1 2 3 4
5 6 7 8
TIME
SEARCH
9 10 11 12
ALARM
SEARCH
13 14 15 16
CONTROL-S
: OFF
2
Highlight ON by pressing the v key.
3
Press the SET key to leave Menu mode.
4
Insert a cassette.
5
Press the REC key.
The ALARM indication of the indication window
lights, and alarm recording will be activated.
During execution of alarm recording, a beep sounds.
You can stop the beep by pressing any key.
Notes
• When alarm recording is ON, recording will be made
with a camera that has been set to NO REC with the
REC FUNCTION MENU if an alarm to that camera
is detected.
• During a period for which "A" has been set in the
REC column on the TIMER set display, alarm
recording will be made even if alarm recording is
OFF.
• When using camera-independent alarm inputs,
recording will be made as specified for each camera,
even if an alarm to Camera 2 is generated before
alarm recording with Camera 1 ends.
Alarm to Camera 1
generated
Camera
No Camera 1
recording recording
recording
Alarm to Camera 2
generated
To cancel alarm recording
To stop recording in progress
Press the STOP key.
To cancel alarm recording
Return the ALARM REC setting to OFF on the display
in step 1.
If there is recording in progress, it will be continued.
Alarm to Camera 1
canceled
Camera 2 No
1 + 2
recording recording
Alarm to Camera 2
canceled