Sony HSR-1 Operating Instructions Manual page 52

Menu Items
Image Control Menu
Monitor screen
SETUP MENU
IMAGE CONTROL MENU
A IMAGE
B IMAGE
CAMERA CONNECTION
MONI DISP STRUCTURE
PLAY DISP STRUCTURE
The items marked with
displayed only when MENU GRADE is set to ENH on the
top menu.
Display
Layer 2 Layer 3
A IMAGE
MONITOR
ALARM CHANGE
AUTO CYCLE
B IMAGE
IMAGE
ALARM CHANGE
AUTO CYCLE
4-6
Chapter 4 Menu Operations
are enhanced items, which are
Char. display
Layer 4
>A Image
>>Monitor
MANUAL
>>>Manual
AUTO >>>Auto
>>Alm Chang
OFF >>>OFF
ON
>>>ON
>>AutoCycle
n SEC (5) n sec
>B Image
>>Image
A IMAGE
>>>A Image
AUTO >>>Auto
Camera n >>>Camera n
>>Alm Chang
OFF >>>OFF
ON >>>ON
>>AutoCycle
n SEC (5) n sec
Character display
Image Menu
↓
Press the b key.
>A Image
The Image Control menu item selected when you left
the menu the last time is displayed.
The setting shown in
bold characters
Layer 4 column of the table is the standard setting and is
displayed with an asterisk on the monitor screen.
Contents
Selects the items regarding the video output from the VIDEO
OUT A connector.
Selects the output method in monitoring.
Selects the camera input to be monitored with the camera
number key.
Cyclically switches the camera input to be monitored.
Determines whether the picture for monitoring to be switched
upon an alarm input.
Does not switch the picture upon alarm input.
Switches the picture to that from the camera for which an alarm
is input.
Enters the setting mode for the cycle of automatic monitor
switching. n = 1 to 60
For the setting procedure, see "Setting the Automatic
Change Cycle" on page 5-11.
Selects the items regarding the video output from the VIDEO
OUT B connector.
Selects the picture to be output.
Outputs the same video signal as that from the VIDEO A
connector.
Outputs pictures from cameras by cyclically switching the
cameras.
Steadily outputs the picture from the specific camera.
n = camera number 1 to 16
Determines whether the picture for monitoring to be switched
upon an alarm input.
Does not switch the picture upon an alarm input.
Switches to the picture from the camera for which an alarm is
input.
Enters the setting mode for the cycle of automatic monitor
switching. n = 1 to 60
For the setting procedure, see "Setting the Automatic
Change Cycle" on page 5-11.
in the Layer 3 or