Switching The Pictures - Sony HSR-1 Operating Instructions Manual

Monitoring Picture

Switching the Pictures

To select a specific camera
To select a divided screen
To automatically switch pages
2-4
Chapter 2 Basic Operations
The number keys of the cameras whose pictures can be monitored flash in
green.
To select the picture(s) for monitoring, use the flashing camera number
keys or the CURSOR V/v/B/b keys.
S
LOCK REW PLAY
º ·
REC FRAME STOP
® æ π
CURSOR V/v/B/b keys
For connections and Image Control menu operation, see Chapter 5 "Connections
and Preparations."
Press the number key corresponding to the camera to be monitored.
The key then flashes in amber, and the picture of the selected camera is
displayed on the full screen.
Press the same key again to return to the pervious condition.
Multiple camera pictures can be monitored by selecting the screen division
mode.
To change the structure
Press the V or v key.
Each time you press either of the keys, the display switches to the next of
night patterns, from the full screen to 16-division mode.
To change the pages
Press the B or b key.
The pages are cyclically switched.
The pages of the structure selected using the V or v key are automatically
switched at the cycle specified in the range of 1 to 60 seconds.
Set MONITOR to AUTO on the Image Control menu.
For the settings, see Chapter 5 "Connections and Preparations."
DIGITAL SURVELLANCE RECORDER HSR-1
†
REC
EJECT
§
1 2
TIME 5 6
MENU
F FWD
SEARCH
‚ ◊
9 10
ı ∫
CURSOR ALARM
FRAME
SEARCH
√ 13 14
¶
SET/YES RESET/NO
Camera number keys
DIGITAL
TIMELAPSE
3 4
7 8
11 12
15 16
CONTROL-S