Adding Pci Cards - Supero SUPERSERVER 1026T-URF4+ User Manual

S S
UPER ERVER 1026T-URF4+ User's Manual
5-6

Adding PCI Cards

PCI Expansion Slots
The X8DTU-LN4F+ has one Universal PCI slot. Riser cards installed to the system
allow you to add PCI expansion cards (see below). The SuperServer 1026T-URF4+
can support the use of one standard size (full-height, full-length) expansion card,
one UIO card and one low-profi le (5.6" length) expansion card (with pre-installed
riser cards).
PCI Expansion Card Installation
1. Confi rm that you have the correct riser card for your chassis model and the
expansion card includes a standard bracket.
2. Power off the system and remove the chassis cover.
3. Install the riser card onto the bracket. Insert the card and bracket into the
appropriate slot on the serverboard. Secure the riser bracket to the chassis
using screws as illustrated.
4. Choose the I/O panel in which to place the expansion card.
5. In that slot, open the I/O panel lever and slide the I/O panel sideways.
6. From inside the chassis, remove the I/O panel.
7. Slide the expansion card into the riser card.
8. Replace the chassis cover and power the system back on.
Riser Card
RSC-R1UU-2E8 (left side)
RSC-R1UU-E8R+ (right side)
PCI Slot/Card Confi gurations
Expansion Card Supported
2x PCI-E x8 cards
1x low-profi le PCI-E x4 card (5.6" length)
5-12