Removing The Heatsink - Supero SUPERSERVER 1026T-URF4+ User Manual

Removing the Heatsink

Warning: We do not recommend removing the CPU or the heatsink. If
you do need to remove the heatsink, please follow the instructions below
!
to prevent damage to the CPU or other components.
1. Unplug the power cord from the power supply.
1. Unscrew and remove the heatsink screws in the
sequence shown in the picture below.
2. Hold the heatsink and gently wiggle it to loosen it
from the CPU. (Do not use excessive force when
doing this!)
3. Once the heatsink is loosened, remove it from
the CPU.
4. Clean the surface of the CPU and the heatsink
to get rid of the old thermal grease. Reapply the
proper amount of thermal grease before you re-
install the heatsink.
Screw#1
Chapter 5: Advanced Serverboard Setup
Screw#4
Screw#3 Screw#2
5-5