Supero SUPERSERVER 1026T-URF4+ User Manual page 50

S S
UPER ERVER 1026T-URF4+ User's Manual
Universal Serial Bus Ports
Two Universal Serial Bus ports are
located on the I/O backplane. USB0
is the bottom connector and USB1 is
the top connector. USB2/3/4/5/7 are
headers provided for front panel ac-
cess (cables not included) and USB6
is a Type A port (see board layout for
locations). See the table on the right
for pin defi nitions.
Fan Headers
The X8DTU-LN4F+ has eight fan
headers, designated Fan1 through
Fan8. FAN1 through FAN6 are for
chassis/system fans while FAN7 and
FAN8 are used for CPU heatsink
fans. Their speed is controlled via
Thermal Management with a BIOS
setting. See the table on the right for
pin defi nitions.
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach the appropriate cable to
inform you of a chassis intrusion.
USB Ports
(USB0/1/6)
USB 2/3
Pin# Defi nition
Pin # Defi nition
1 +5V
1
2 PO-
2
3 PO+
3
4 Ground
4
5 NA
5
Pin # Defi ni-
tion
1
3
5
7
9
Fan Header
Pin Defi nitions
Pin#
1
2
3
4
Chassis Intrusion
Pin Defi nitions
Pin#
1
2
5-18
Front Panel USB
Pin Defi nitions
USB 4/5
Pin # Defi nition
+5V 1 +5V
PO- 2 PO-
PO+ 3 PO+
Ground 4 Ground
Key 5 NC
(NC= No connection)
Internal USB
Pin Defi nitions (USB 7)
Pin # Defi ni-
tion
PWR 2 Ground
USBD- 4 Ground
USBD+ 6 Ground
Ground 8 Ground
NA 10 Ground
Defi nition
Ground (Black)
+12V (Red)
Tachometer
PWM Control
Defi nition
Intrusion Input
Ground