Graphics Controller; Other Features; Server Chassis Features; System Power - Supero SUPERSERVER 1026T-URF4+ User Manual

Graphics Controller

The X8DTU-LN4F+ features an integrated Matrox G200eW graphics chip, which
includes 16 MB of DDR2 memory.

Other Features

Other onboard features that promote system health include onboard voltage moni-
tors, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
1-3

Server Chassis Features

The 1026T-URF4+ is built upon the SC119TQ-R700UB chassis. Details on the
chassis and on servicing procedures can be found in Chapter 6.The following is a
general outline of the main features of the chassis.

System Power

The SC119TQ-R700UB features a redundant 700W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.

SATA Subsystem

The SC119TQ-R700UB chassis was designed to support eight hot-swap hard
drives.

PCI Expansion Slots

Two riser cards are included. The RSC-R1UU-E8R+ is located on the right side of
the chassis and supports one low-profi le PCI-E x8 card. The RSC-R1UU-UE16 is
located on the left side of the chassis and supports one UIO card and one PCI-E
x16 add-on card. See our web site for details (http://www.supermicro.com/products/
nfo/UIO.cfm). See section 5-6 of this manual for details.

Front Control Panel

The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), overheat/fan/power failure
and UID (Unit Identifi er). A main power button and a UID button is also included.
Chapter 1: Introduction
1-3