Onboard Controllers/Ports; Graphics Controller; Aspeed Ast2400 Bmc Controller - Supero FatTwin F628R3-FT User Manual

Onboard Controllers/Ports

One Fast UART 16550 serial port, one 9-pin RS-232 port are located on the
serverboard. The front I/O ports include a VGA (monitor) port, two USB 3.0 ports,
an IPMI dedicated LAN port and two Gigabit Ethernet ports.
Note: For IPMI Confi guration Instructions, please refer to the Embedded IPMI
Configuration User's Guide available @
manuals/.

Graphics Controller

The X10DRFF features an integrated Aspeed AST2400 BMC Controller.

Aspeed AST2400 BMC Controller

Note: The term "IPMI controller" and the term "BMC controller" can be used
interchangeably in this section.
The Aspeed AST2400 BMC Controller, a Baseboard Management Controller (BMC),
supports 2D/VGA-compatible Graphic Cores with PCI interface, creating multi-media
virtualization via Keyboard/Video/Mouse Redirection (KVMR). The Aspeed AST2400
BMC Controller is ideal for remote system management.
The Aspeed AST2400 BMC Controller interfaces with the host system via PCI
connections to communicate with the graphics cores. It supports USB 2.0 and 1.1
for remote keyboard/mouse/virtual media emulation. It also provides LPC interface
support to control Super IO functions. The Aspeed AST2400 BMC Controller is
connected to the network via an external Ethernet PHY module or shared NCSI
connections.
The Aspeed AST2400 BMC Controller communicates with onboard components via
six SMBus interfaces, PECI (Platform Environment Control Interface) buses, and
General Purpose I/O ports.
http://www.supermicro.com/support/
1-3
Chapter 1: Introduction