Getting Started; Baby Unit Power Supply; Parent Unit Power Supply - Motorola MBP867 User Manual

2. Getting Started

2.1

Baby Unit Power Supply

1. Connect the USB plug of the power adapter to the Baby Unit (camera) and
the other end to the electrical outlet.
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in blue.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit OFF.
2.2

Parent Unit Power Supply

IMPORTANT
Charging the Parent Unit fully before initial use is recommended.
1. Connect the USB plug of the power adapter to the Parent Unit and the
other end to the electrical outlet.
2. Press and hold the
Parent Unit ON.
3. Once the Baby and Parent Units are switched ON, the display on the Parent
Unit will show the video captured by the Baby Unit.
8
P
POWER ON/OFF button for 2 seconds to turn the
Getting Started