Help - Motorola MBP867 User Manual

7. Help

Display
No Display
• Try recharging the Parent Unit.
• Reset the Units. Unplug both the units' electrical power, then plug them
back in.
• Is the Unit ON?
Press and hold the POWER ON/OFF button
ON.
• Is the correct Camera selected?
Change the Camera number, if necessary.
• Is the Video Display turned ON?
Press the VIDEO ON/OFF button
• When operating using the batteries only, the display will go blank after
5, 30 or 60 minutes to save power (depending on video on setting). Be
advised the unit is still active and will give you audio alerts. You can reactivate
the screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging the Parent Unit.
• If the Baby Unit is too far away it may be going out of range, move the Baby
Unit closer to the Parent Unit.
• Reset the Units by disconnecting them from the electrical power. Wait about
15 seconds before reconnecting. Allow up to one minute for the Baby Unit
and the Parent Unit to synchronize.
• See 2.3 Registration (Pairing), if there is a need to re-register the Unit.
Help
P
on the parent unit to turn it
V
to turn On.
17