Using The Baby Monitor; Set Up; Night Vision Mode; Talk Mode - Motorola MBP867 User Manual

3. Using the Baby Monitor

3.1

Set Up

• Place the baby unit in a convenient location (ie: on a table) and point the
camera lens towards the area you wish to monitor.
• Adjust the Baby Unit's head angle by rotating the Camera up, down, left or
right until you are satisfied with the image on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the Units to different locations or ensure they
are not close to other electrical equipment.
3.2

Night Vision Mode

The Baby Unit has 7 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in light sensor on the top of the Unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
top of the screen.
3.3

Talk Mode

Press and hold the
the Baby Unit's loudspeaker. The
screen.
3.4

Video ON/OFF

V
Press the VIDEO ON/OFF key to turn the LCD display ON/OFF but still
leaving the Audio Monitor ON.
3.5 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
10
T
TALK button on the Parent Unit to talk to your baby through
T
icon will be displayed at the
icon will be displayed at the top of the LCD
Using the Baby Monitor