Imperx LYNX User Manual page 166

FILE MENU
Load from File:
Load from
Workspace:
Load from
Factory:
Load from
User Space #1:
Load from
User Space #2:
Save to File:
Save to
Work Space:
Save to
Factory:
Save to
User Space #1:
Save to
User Space #2:
Select Port:
Select Camera:
Exit:
This menu selects the 'Boot From' source. Upon power up,
BOOT MENU -
the camera will load its registers from the selected 'Boot
From' source.
From Factory
Settings:
From User
Settings 1:
From User
Settings 2:
LYNX Hardware User's Manual
Loads the camera registers from a saved configuration
file.
Loads the LYNX Configurator GUI with the current
status of the camera registers.
Loads the camera registers and LYNX Configurator
GUI with the original (factory) settings.
Loads the camera registers and LYNX Configurator
GUI with a saved camera settings in the user
space 1.
Loads the camera registers and LYNX Configurator
GUI with a saved camera settings in the user
space 2.
Saves the camera registers to a configuration file.
Saves the current LYNX Configurator GUI settings
to the camera registers.
Saves the current LYNX Configurator GUI settings
to the camera factory space. Note that this space is
password protected.
Saves the current LYNX Configurator GUI settings
to the camera User 1 space.
Saves the current LYNX Configurator GUI settings
to the camera User 2 space.
Selects a communication port.
Selects a camera from the list of the available
cameras.
Closes the LYNX Configurator program.
The camera loads the original (factory) settings.
The camera loads the settings saved in User 1 space.
The camera loads the settings saved in User 2 space.
166 of 216