Imperx LYNX User Manual page 106

Example C. Performing a non-standard 12 to 10 bit conversion:
The original camera data is D0 (LSB) to D11 (MSB)
D0 D1 D2 D3
Create a LUT, which truncates the 2 most significant bits (bits are
shifted with two to the right).
Modified 12 bit Output Data - (10 bit data + 2 bits shifted right)
0 0 D0 D1
During the 12 to 10 bit conversion, the 2 least significant bits will be
truncated.
Modified 12 bit Output Data - (10 bit data + 2 bits shifted right)
0 0 D0 D1
The camera output will be 10 bits, but in this case bits D0 to D9 are
mapped to the output.
D0 D1
If only the standard conversion was applied, D2 to D11 would have
been mapped to the output.
D2 D3
LYNX Hardware User's Manual
Input Data - 12 bit
D4 D5 D6 D7
D2 D3 D4 D5
D2 D3 D4 D5
10 bit output data
Modified 10 bit Output Data
D2 D3 D4 D5
Standard 10 bit Output Data
D4 D5 D6 D7
106 of 216
D8 D9 D10 D11
D6 D7 D8 D9
D6 D7 D8 D9
D6 D7 D8 D9
D8 D9 D10 D11